聯系方式
意見反饋

Fits flexibly into the narrowest corners

光纖傳感器和光纖

When installation space is extremely limited or the objects to be detected are tiny, fiber-optic sensors are the ideal solution. If it is necessary for strict requirements to be fulfilled, such as on the sensing range, temperature resistance, material durability or a flexible mounting process, the intelligent combination of sensors and fibers can provide the perfect solution. The extensive fiber portfolio from SICK with optical heads leave nothing to be desired when it comes to application-specific adaptation.

更多

光纖傳感器

在總線模式下

Fiber-optic sensors can be used as bus systems. This results in synchronization of the transmission pulse pattern of the connected

devices. This prevents mutual interference if fiber-optic heads are mounted close together.

更多

It's the tip that makes the difference

Fibers from SICK

The selection of the suitable fibers and the specific version is the starting point for a sensor solution which fits the application. At SICK, the broad range of plastic and glass fibers permits optimal automation solutions. This applies, in particular, to tasks where the fiber must be specifically adapted to the application, where flexible cabling is crucial, where high temperatures are common, or where a particular material compatibility is important.

產品選擇

Wide selection of accessories

Optional accessories for fiber-optic sensor and fibers

廣泛實用的配件進一步補充了 SICK 光導纖維體產品組合:

用于上千光導纖維體的附加透鏡將光束聚焦,從而可以檢測極小的物體。

單路光導纖維體的附加透鏡減小了反射角,可增大觸發觸發感應距離,避免物體周圍不必要的反光。

其他配件,如金屬?;と砉?、安裝支架和光纖傳感器?;ふ秩貌廢盜懈油晟?。

產品選擇

Communication modules for fiber-optic sensors

Fieldbus gateways

可以使用所有相關的數據接口,從而減少了布線工作量。這不僅節省了規劃和安裝時間,還提高了性能。現場總線網關可以通過內部總線輕松與兼容設備連接。通過現場總線,只需按下按鈕即可從控制系統實現規格轉換或產品更換。通過訪問診斷功能,可以提前識別例如維護需求,然后即可在機器計劃?;奔淠謚蔥姓廡┪すぷ?。

產品選擇
Fits flexibly into the narrowest corners
光纖傳感器
It's the tip that makes the difference
Wide selection of accessories
Communication modules for fiber-optic sensors

選擇您的解決方案

篮球队几个人 www.vugqn.com 在此您可以查找合適的產品或產品系列

篩選依據:
150.0 mm 30000.0 mm
1.0 mm 60.0 mm
4.0 mm 100.0 mm
4.0 mm 40000.0 mm

375 匹配:

匹配 1 - 8 375

WLL180T-P432
6039093
WLL180T
光纖傳感器
  • 最大開關距離: 12 ... 20 m
  • 輸入: 多功能輸入端 MF
  • 開關量輸出數量: 1
  • 開關類型: 明/暗切換
  • 連接類型: 電纜 4針
  • 外殼防護等級: IP50
  • 設置: 菜單控制, 示教按鍵, 電纜
WLL180T-P434
6039095
WLL180T
光纖傳感器
  • 最大開關距離: 12 ... 20 m
  • 輸入: 多功能輸入端 MF
  • 開關量輸出數量: 1
  • 開關類型: 明/暗切換
  • 連接類型: 插頭,M8,4 針
  • 外殼防護等級: IP50
  • 設置: 菜單控制, 示教按鍵, 電纜
GLL170-N334
6063338
GLL170
光纖傳感器
  • 最大開關距離: 0 ... 800 mm
  • 開關量輸出數量: 1
  • 開關類型: 明/暗切換
  • 連接類型: 插頭,M8,4 針
  • 外殼防護等級: IP66
  • 設置: 電位計
GLL170-N333
6063339
GLL170
光纖傳感器
  • 最大開關距離: 0 ... 800 mm
  • 開關量輸出數量: 1
  • 開關類型: 明/暗切換
  • 連接類型: 插頭,M8,3 針
  • 外殼防護等級: IP66
  • 設置: 電位計
GLL170T-B432
6063340
GLL170
光纖傳感器
  • 最大開關距離: 0 ... 1320 mm
  • 輸入: 示教輸入端
  • 開關量輸出數量: 1
  • 開關類型: 明/暗切換
  • 連接類型: 電纜 4針
  • 外殼防護等級: IP66
  • 設置: 示教按鍵, 電纜
GLL170T-B333
6063342
GLL170
光纖傳感器
  • 最大開關距離: 0 ... 1320 mm
  • 輸入: 示教輸入端
  • 開關量輸出數量: 1
  • 開關類型: 明/暗切換
  • 連接類型: 插頭,M8,3 針
  • 外殼防護等級: IP66
  • 設置: 示教按鍵, 電纜
GLL170-P332
6063334
GLL170
光纖傳感器
  • 最大開關距離: 0 ... 800 mm
  • 開關量輸出數量: 1
  • 開關類型: 明/暗切換
  • 連接類型: 電纜,3 芯
  • 外殼防護等級: IP66
  • 設置: 電位計
GLL170-P334
6063335
GLL170
光纖傳感器
  • 最大開關距離: 0 ... 800 mm
  • 開關量輸出數量: 1
  • 開關類型: 明/暗切換
  • 連接類型: 插頭,M8,4 針
  • 外殼防護等級: IP66
  • 設置: 電位計

匹配 1 - 8 375

優勢

Fits flexibly into the narrowest corners

The combination of fiber-optic sensor and fibers is an excellent solution for a wide range of applications. Challenging detection tasks can be solved in combination with the matching fibers thanks to the comprehensive adjustment options of the fiber-optic sensor.

The comprehensive fiber portfolio from SICK satisfies all requirements regardless of whether the size, mounting options, material resistance or suitability for a special application is the deciding factor.

Bussystem

When using the fiber-optic sensors in bus operation, up to 16 devices can be connected to a bus system. This creates several benefits.

Prevention of mutual interference

Through synchronization of the transmission pulse pattern, each fiber-optic sensor detects only the emitted light which it itself emitted.

Reduced setting and wiring effort

The parameter settings can be copied from the base sensor to all other connected fiber-optic sensors with the push of a button.

With a single input signal on the base sensor, all other sensors can be taught in at the same time. In addition, the base sensor supplies all other sensors with voltage, resulting in reduced wiring effort.

Connection to fieldbus gateways

The fiber-optic sensors can be connected to a fieldbus gateway as a bus variant. The fieldbus allows you to make format or product changes from the control at the touch of a button. This means extensions and changes are easy to make. The transmission of cyclical data enables quick access to all process data of the connected sensors. Thanks to acyclical data communication, you can always access diagnostic functions. For example, this makes it possible to identify the need for maintenance work early on, which can then be done in times of planned machine downtime.

Fieldbus gateways

Using the fieldbus gateway, up to 16 fiber-optic sensors (WLL180T and KTL180) and distance sensors (OL1, OD Mini Pro, OD5000 in combination with the AOD1 evaluation unit) can be integrated into a network. All sensor data can be read out and written on the sensor using the fieldbus gateway. Settings can also be made and reviewed in this way (e.g. in the event of format or product changes) if the sensors are installed in hard-to-reach places.

The sensor and therefore the machine status can be determined at any time with the monitoring of sensor data, and diagnostic functions can also be implemented. All sensor data is transmitted to a fieldbus cable, which considerably decreases wiring effort.

Wide selection of accessories

Mounting systems

5306574 BEF-WLL170

5325812 BEF-WLL180

5331290 BEF-LL3M6500

5331291 BEF-LL3M61000

5305479 BF-WLL160-10

5306094 BF-WLL160-13

5313011 BF-EB01-W190

5336263 BF-GLL170

Adapter lenses

5308127 LL3-DA01

5308128 LL3-TA01

5308129 LL3-TA02

5308130 LL3-DA02

5326461 LL3-TA01S

5326462 LL3-TA03

5326463 LL3-TA04

5326464 LL3-TA05

5326465 LL3-DA03

5326466 LL3-DA04

5326467 LL3-DA05

5326468 LL3-DA06

5326469 LL3-DA07

5328271 LL3-TA01IR

5334039 LL3-DA08

5334040 LL3-DA09

5338642 LL3-TA07

5338873 LL3-TA06

Apertures

5334439 BL-TS40-40

Fiber cutting device

5304141 FC

下載專區

向上